TOTAKU
ECO SERIES
TOTAKU ECO DUCT
Features
• Light weight, flexible and easy to handle.
• Usable for the food applications.
• Excellent bend durability.
• Transparent wall enables visual check of the material flow.
• Can be incinerate by fire after use, no noxious gas is generated.
• The tube material have excellent abrasion resistance (At normal temperature).
TOTAKU ECO DUCT-AS
Features
• The high anti-static effect is being added to the TOTAKU ECO DUCT.
• Can be used for foodstuffs.
TOTAKU ECO DUCT-Ag+
Features
• Anti-bacterial performance was added on TOTAKU ECO DUCT. The silver ion type anti-bacterial agent (FDA approval) with prominent antibacterial properties was compounded.
• Usable for the food applications.
TOTAKU ECO LINE
Features
• For transportation of foodstuffs.
• Can be washed by hot water or 95% ethanol, and keeps cleanliness
• Possible to incinerate after hose used. Noxious fume is not generated (Ratio of ashes burning out is less than 0.1%)
• Transparent wall enables visual check of the material flow.
• Flexibility enables labor-saving
• With reinforcing fiber, can withstand pressure Max. 0.5Mpa (5.1kgf/cm2).
• Lightness enables the hose to float on water
TOTAKU ECO LINE-HO
Features
• Anti-bacterial performance was added on TOTAKU ECO DUCT. The silver ion type anti-bacterial agent (FDA approval) with prominent antibacterial properties was compounded.
• Usable for the food applications.
• Can be used for oils and fats, fat-related foods and general foods, conformed to Foods. Conformed to “Food Sanitary Law, Notification of Ministry of Health , Labor and Welfare No.201” (All items including heptanes).
• Hygienic, can be cleaned with hot water, with 95% Ethanol.
• Can be incinerated by fire after use, no noxious gas is generated (ash less than 0.1%).
• Translucent wall enables visual check of the material flow.
• With reinforcing fiber, can withstand pressure Max. 0.5Mpa (5.1kgf/cm2).
• Lightness enable the hose to float on water
TOTAKU ECO SD-C
Features
• For transportation of foodstuffs Conformed to “Food Sanitary Law, Notification of Ministry of Health , Labor and Welfare No.201” (Except for dissolving test on oils and fats and fat-related food, Heptanes).
• Excellent in heat-resistance and flexibility
• Can be washed by hot water or 95% ethanol, and keep cleanliness
• Excellent in lightness, flexibility, and abrasion-resistance
• Smooth inner and outer surface.
• Translucent wall enables visual check of the material flow.
TOTAKU ECO SD-AS
Features
• For transporting of foodstuffs Conformed to “Food Sanitary Law, Notification of Ministry of Health , Labor and Welfare No.201” (Except for dissolving test on oils and fats and fat-related food, Heptanes).
• Less inner resistance enables more transportability.
• High anti-static performance.
• Lightweight, very flexible and superior abrasion resistance.
• Translucent hose wall enables visual check of the material flow.
TOTAKU ECO SD-ASP
Features
• Reduction of a volume of substances adhesive to the hose bore.
• High anti-static performance.
• Lightweight, very flexible and superior abrasion resistance.
• Translucent hose wall enables visual check of the material flow.
SHIME-TOTAKU for TOTAKU ECO LINE (made of resin)
Features
• Use this as material to smooth surfaces when tightening a corrugated TOTAKU ECO LINE with flat bands, etc.
• For preventing an acute bending near the couplings.
TOTAKU ECO PP SPRING
Features
• No taste and scentless, good for transporting foodstuffs
• Consists of plasticizer of a non-phthalic acid system, conforming to Notification of Ministry of Health, Labor and Welfare No.267 dated August 1st, 2003.
• Can transport fat or fatty foodstuffs
Hose for foodstuffs
TOTAKU SD-F
Features
• Heat-resistant type of TOTAKU SD-F.
• Consists of excellent heat-proof material (Up to 80o )
• Consists of plasticizer of a non-phthalic acid system, conforming to Notification of Ministry of Health, Labor and Welfare No.267 dated August 1st, 2003.
• Can transport fat or fatty foodstuffs
TOTAKU SD-HF
Features
• Light-weight and flexible than TOTAKU SD-F.
• High anti-static performance.
• Inner slipping improves more than TOTAKU SD-F.
• Conform to Notification of Ministry of Health, Labor and Welfare No.201(Except for Heptanes )
• DOP isn't included.
TOTAKU SD-ASF
Features
• Spread type of TOTAKU DUCT-D.
• There is little internal resistance compared with TOTAKU DUCT-D, and good transportation ability is obtained.
• Lightness and Flexibility enable labor-saving.
• Easy to cut and install, easy connection
Duct hose
TOTAKU DUCT-EE
Features
• Spread type of TOTAKU DUCT-D.
• There is little internal resistance compared with TOTAKU DUCT-D, and good transportation ability is obtained.
• Lightness and Flexibility enable labor-saving.
• Easy to cut and install, easy connection
TOTAKU CLEAR DUCT
Features
• Confirmation can do the contents of a transportation thing by the clear type of TOTAKU DUCT-EE.
TOTAKU DUCT-D
Features
• Lightness and flexibility enable labor-saving.
• Easy to cut and install, easy for installation.
TOTAKU DUCT-FR
Features
• With reinforcing fiber , strong in growth and excellent bending resistance.
• Matches new equipment by ivory white coloring which changes images of vinyl ducts.
TOTAKU HERAN DUCT
Features
• More than double abrasion-resistance compared with the standard TOTAKU DUCT (according to our testing methods)
• Excellent cold-resistance and heat-resistance (Permissible temperature range : -30~80o )
• Excellent anti-static effect (material resistance by volume : 105Oo cm or less)
• Less Ozone-crack damage compared to a traditional rubber hose.
TOTAKU BELLOW DUCT
Features
• Can be freely expanded and contracted, and can be stored very compactly in about 1/3 of original length.
• Transport is easy and economical because it is small and light in spite of its large diameter.
TOTAKU DUCT-OR
Features
• Excellent oil resistance.
• Ivory color harmonizes with the equipment.
• Light weight and superior flexibility.
• Small internal resistance helps working efficiency and energy saving.
TOTAKU ELASTIC DUCT
Features
• Length can be adjusted, and can be fixed at any angle and in any direction
• Can be shrunken to 1/3~1/4 of the original length, which can decrease transport costs and storage space before installation
TOTAKU RIGID DUCT-PP
Features
• It can be 10-20% lighter than the former model(made of PVC)
• Can be bent freely, and be installed while keeping the bent angle (Please use this in indoor environments. The ability to keep the bend angle will be lower by the rise of the using temperature. )
• By twisting the duct end, the diameter can be varied
• Easy to cut with knife
• By screwing into each end of the connecting ducts, they can be easily combined (After connecting them, please wind the joint parts with a vinyl tape, etc.)
• Possible to incinerate after hose used.
TOTAKU DUCT-AL I & TOTAKU DUCT-AL II
Features
• Stretchable, flexible, easily laid in narrow spaces.
• TOTAKU DUCT-AL are contracted to a length of 1/5 ,and TOTAKU DUCT-AL 2 are contracted to a length of 1/10, and can be stored compactly, so stock space isn't taken up.
• Good bending resistance, and heatproof. (80 o or less)
TOTAKU MD-18
Features
• With aluminum coated glass-cloth and zinc-coated steel sheet as a reinforcing core, this can be used at 180o or less.
• Stretchable and easy for placing, storing and transporting (However, please avoid stretching and shortening TOTAKU MD-18 repeatedly)
• The aluminum coated glass-cloth sheet is especially good for bending resistance and flame-retardation. (Acceptable product for flame prevention, first class)
TOTAKU MD-25
Features
• With specially coated glass-cloth and stainless-steel sheets (SUS304) as a reinforcing core, this can be used at 250o or less.
• Stretchable and easy for placing, storing and transporting
• Specially coated glass-cloth is good for flame-retarding. (Acceptable product for flame prevention, first class)
TOTAKU MD-45
Features
• All materials used are stainless (SUS304), excel at heat-resistance, and can be used at 450 o or less.
• Materials used are all stainless steel (SUS304) and have good heat resistance. Materials are corrosion-retarding against gases containing acid, alkaline, solvents, etc (at room temperature).
• This is for fixed installation but can be curved. (However, TOTAKU MD-45 can't be bended repeatedly)
TOTAKU IT-13
Features
• Made of aluminum-polyester cloth and zinc -coated steel sheet, and is usable at the temperature of 130o or less.
• Specially laminated film is used, which reduces dusts being generated by surface friction.
• Retractable, and easy storage and transportation.
Hose for general suctions and deliveries
TOTAKU LINE ACE
Features
• The pressure resistant type of TOTAKU SD.
• With reinforcing fiber, withstands a maximum working pressure of 0.50MPa{5.1 kgf/cm2}.
SHIME-TOTAKU for TOTAKU LINE ACE (made of resin)
Features
• This resin-made coupling is as lightweight as one half of the weight of metal couplings.
• Allowable pressure of TOTAKU LINE ACE with which SHIME-TOTAKU is connected is equal to that of the hose only.
• Attaching and detaching work of the couplings on the job site is easy.
• It doesn't rust due to being made by the resin.
• Has a high durability. (Proven upon the repeating pressure test) SHIME-TOTAKU was installed at both ends of TOTAKU LINE ACE placed in a straight form, and then 0-0.5MPa pressure was repeatedly applied to them in every 20 seconds.
TOTAKU SD-A
Features
• Highly flexible due to corrugated outer surface (inner surface is flat and smooth.)
• Transparent wall enables visual check of the material flow.
TOTAKU SD-A2
Features
• The light weight type of the TOTAKU SD-A.
• Highly flexible due is more excellent than TOTAKU SD-A.
TOTAKU SD-C
Features
• Both inside and outside are flat.
• More proof against high-pressure comparing with TOTAKU SD-A.
• Partly transparent wall enables visual check of the material flow.
TOTAKU SD-C3
Features
• Light weight type of TOTAKU SD-C.
Hose & Duct for powder and granule
TOTAKU SD-CE
Features
• With built-in earth wire(copper wire), excellent in anti-static effect
• Transparent wall enables visual check of the material flow.
TOTAKU SD-AS
Features
• With special formulation of soft-PVC, the anti-static effect will last as shown in the under-mentioned table . (ref. Table 2)
• Transparent wall (clear green) enables visual check of the material flow.
TOTAKU DUCT-AS
Features
• Duct type of TOTAKU SD-AS.
• With special formulation of soft PVC, the anti-static effect will last as shown in the under-mentioned table.
Hose for pressure-resistance and abrasion resistance
TOTAKU LINE POWER-AT
Features
• Max allowable pressure is 1.00MPa{10.2 kgf/cm2}(at room temperature), good pressure durability, and a structure of less elongation during pressuring
• As the inside layer is of abrasion resistant rubber, abrasion resistance is good.
• Strong resistance to outside pressure, with little deformation
TOTAKU LINE POWER-WA
Features
• Because the max allowable pressure is 1.50Mpa {15.3kgf/cm2} (at room temperature), it has excellent pressure-resistance among pressure-resistant and abrasion resistant hoses.
Hose for abrasion resistance
TOTAKU HERAN
Features
• With abrasion resistant rubber, about three times as strong as “TOTAKU SD-A” in abrasion resistance.
• With abrasion resistant rubber, excellent in anti-static effect.
TOTAKU HERAN-N
Features
• Model resistant to hot wind of 100 o (designed for resistance to hot wind of a maximum of 120o in straight installation)
• Model safety improved by grounding effect with steel wires as well as conductive rubber.
• Less ozone degradation compared to TOTAKU HERAN.
• Excellent weather resistance
TOTAKU HERAN-CL
Features
• Abrasion resistance four times as much as TOTAKU HERAN-N.
• Transparent wall enables visual check of the material flow.
• Embedded grounding wire gives an excellent antistatic effect.
• With very smooth inner wall, you can get increased flow capacity.
TOTAKU HERAN ACE
Features
• Abrasion resistance four times as much as TOTAKU HERAN-N.
• Translucent wall enables visual check of the material flow and easy detection of a clogged portion.
• Light weight and flexible.
• Pressure-resistant performance against maximum allowable pressure of 0.5MPa1(5.1kgf/cm2).
• With reinforcing fiber, this hose is quite durable and most suitable for using at the uneven place where the hose is subject to elongation load.
• Embedded grounding wire gives an excellent anti-static effect.
About Us
Our Contacts
99/385 Moo 6, Mitsumphan Road, Banpuk, Muang, Chonburi 20130
098-094-5444, 098-628-9333
038-193-321